NTD5P Dell 2U SAS Cable Assembly

Dell NTD5P 2U SAS Cable Assembly for PowerEdge Storage Connectivity:

The Dell NTD5P (also listed as 0NTD5P) is a genuine Dell SAS cable assembly designed for 2U rack servers. Inside the chassis, it carries the Serial Attached SCSI (SAS) signal path between the storage controller and the drive backplane, so the server's hard drives and SSDs can talk to the RAID or HBA controller. When a cable is damaged, pinched or missing, drives can drop offline or go undetected. Fitting the correct Dell part number restores a clean, reliable storage path and keeps the server in its original factory configuration.

Built for Dell 2U Rack Servers:

Dell 2U servers pack more drive bays, controllers and cooling into the chassis than 1U systems, so internal cables are routed and sized to fit a specific layout. The NTD5P is sold as a 2U assembly, which means its length, bends and connector orientation suit 2U internal routing. Dell often uses different cable part numbers for different PowerEdge generations, backplane types (for example 8 x 3.5-inch or 2.5-inch layouts) and controller positions. For that reason, always match the NTD5P part number with the label on your existing cable or with the parts list for your server's service tag before ordering.

SAS Storage Performance and Reliability:

SAS is the enterprise standard for connecting server storage. It is full duplex, supports dual-port drives for redundancy, and is backward compatible with SATA drives on SAS controllers. Depending on the controller and backplane, SAS links run at 6 Gb/s (SAS-2) or 12 Gb/s (SAS-3) per lane, and internal Mini-SAS connectors bundle four lanes together. A Dell-specified cable keeps signal integrity within the tolerances the controller and backplane were validated for, which helps avoid link errors, degraded RAID arrays and intermittent drive failures.

Typical Uses:

The NTD5P is used for server repairs, replacing a damaged or lost SAS cable, completing a storage configuration when adding a controller or backplane, and refurbishing PowerEdge servers for redeployment. Data centers, IT maintenance teams, server refurbishers and system integrators keep cables like this as spares, because a single faulty cable can take an entire drive array offline.

Installation Tips:

Shut down the server, disconnect all power cords and use ESD protection before opening the chassis. Note the routing of the original cable, then connect the NTD5P to the controller and backplane connectors until the latches click into place. Route the cable along the same path so it does not block airflow or get pinched by the cover or fan assembly. After reassembly, check in the controller BIOS, Dell iDRAC or OpenManage that every drive is detected and that any RAID virtual disks report an optimal state.

Why Choose a Genuine Dell Cable?

Dell Technologies designs PowerEdge servers and their internal parts as a validated system. Using the original Dell part number gives the correct length, connectors and routing for your chassis, avoids fit problems with third-party cables, and supports a clean service history. Order the Dell NTD5P 2U SAS Cable Assembly by part number to get the right replacement the first time.

1. Non-Returnable Items: Once an order is processed, products that do not fall under 3D memory categories are considered final sale. These items cannot be cancelled or returned, so we strongly recommend confirming specifications prior to purchase.

2. Restocking Policy: In specific cases, a restocking fee of up to 25% may be applied. This depends on the product category and condition. Our team will always advise you in advance where applicable.

3. Product Condition: Unless clearly stated as brand-new retail stock, all products are supplied in professionally refurbished condition. Each item is thoroughly tested to ensure reliable performance and quality assurance.

4. Fast Dispatch & Availability: We aim to dispatch most orders within 24 hours, subject to stock availability. If you require urgent or same-day shipping, please contact our customer support team at (207) 993-8331 directly for expedited handling.

5. Part Number Compatibility: Leading manufacturers such as Dell, HP, IBM, and Compaq may assign multiple identifiers to the same product, including Spare Part Numbers (Spare P/N) or FRU (Field Replaceable Unit) numbers. The item you receive may carry either designation, both of which are fully compatible and functionally equivalent.

6. Warranty Coverage: All products include a 30-day limited warranty, covering replacement in the event of DOA (Dead on Arrival) items with the same part number. Selected storage devices may qualify for an extended 90-day warranty—please confirm with our team before purchase. Additionally, manufacturer warranty options may intact for new product if any. 

7. Drivers & Installation Media: As most products are supplied in bulk packaging, installation media such as CDs, drivers, or manuals may not be included. If required, please check availability with our sales team prior to ordering.

8. Shipping Information: Standard shipping rates are automatically calculated for lightweight IT components such as memory and storage devices (under 5 lbs). For larger or heavier equipment—including servers, racks, and motherboards—shipping costs may vary. Our team will notify you if any adjustments are required. 

9. Product Images Disclaimer: All images displayed are for reference purposes only. The actual product received may differ slightly in appearance while maintaining the same specifications and performance.

10. Packaging Details: Some items may be delivered in bulk or non-retail packaging, especially for high-volume or consolidated orders. This ensures cost efficiency without compromising product quality.

11. End-of-Life (EOL) Products: For discontinued or end-of-life products, we may supply an equivalent replacement with matching specifications, functionality, and compatible FRU where necessary.

12. Refurbished Printers: Please note that refurbished printers may not include toner cartridges, or may be supplied with partially used consumables.

13. Need Assistance? If you have any questions regarding product specifications, compatibility, warranty, or shipping, our team is here to help. Contact us at support@itnetworkstrade.co.uk or call us at (207) 993-8331 directly before placing your order to ensure a smooth purchasing experience.